You can never overemphasize the importance of having a good IP surveillance system. Not only does it help you to keep track of whatever business is going on in the area, but it also allows you to be able to monitor and record footage of where it’s installed, which helps in identifying potential Intruders and preventing crime.

The benefits of having an IP surveillance system are many, but it can only be enjoyed when the surveillance cameras are properly installed. Only when they are can you maximize their use. Of course, achieving this would require a few steps. In this article, we’ll walk you through the steps involved in installing surveillance cameras.

Steps Involved in Installing Your IP Surveillance Camera

  • Survey the Site:This is one of the first things you want to do when setting up your surveillance cameras. This step requires you to study the property to be sure of the types, the exact points, and how many IP cameras are needed. When considering this factor, it’s important to make sure the locations of the cameras cover the whole building, including the entry points leaving no blind spots whatsoever. It’s also important to consider the purpose of different cameras like the 4MP Full-Color IP Camera,¬†which is perfect for outdoors because of its ability to display better color images despite low illumination.
  • Install the Network System: You have to set up your POE network connection here. This process mainly involves the running of network cables through ceilings and walls to the different locations where the camera would be installed.
  • Add the Network Switches with the POE:Since IP cameras use POE (Power Over Ethernet), you need to add POE switches powerful enough to support the cameras on all ports.
  • Install IP Mounting Bracket:This camera accessory is available in different shapes. The mounting bracket can be described as part of the IP camera where the rest of the camera is mounted later. So you can drill in your mounting bracket.
  • Mount the Camera & Connect with Network:Now, you can mount the camera on the bracket you’ve installed (make sure the camera’s position views exactly the area you want it to cover). After this, connect your camera with the network cable (POE) you’ve set up.
  • Link the Camera to The Network System:What you want to achieve here is to make it possible for the camera footage to be viewed on the network. To make this happen, many camera manufacturers provide an installation tool where all their cameras can be found; all you have to do is configure the IP address.
  • Final Adjustment:Once the linking is done, you can finally now check the camera footage, if it’s covering the right area. If it’s not, you can adjust the field of view and zoom in or out either from the computer or manually.

Conclusion

As explained earlier, many people do not enjoy the many benefits the presence of surveillance cameras has to offer because they do not properly set up their cameras. It is important to note that there are no steps to be overlooked when setting up your IP surveillance cameras, as they are all very vital.

LEAVE A REPLY

Please enter your comment!
Please enter your name here